new-arrival
 
ASICO Product Range
 
 
 
 

Testing & Measuring Instruments

1 [2] 3 [«Back ||Next »]
 

EPROM Eraser (AE 486 )


 

Micro-controller Programmer (AE 487 )


 

Stroboscope (50~40000FPM) (AE 488 )


 

Distortion Factor Meter 20Hz~20KHz (AE 489 )


 

Flux Meter (AE 490 )

Workable on 220V/50Hz measuring range upto 2K/20K guass direct reading calibrated in terms of guass, 3.5 digit display complete with Hall Probe Accuracy 0.5%


 
Output Power Meter (AE 491 )

Specifications: Wattmeter relay: 0 to 100W in four steps : 0 to 10mW-1W-10W-100W & signal can be attenuated up to 40dB. In four steps of 0-10-20-30- 40dB. & Load that can be given to a audio & radio signal is from range 3 ohm to 10K ohm in ten steps i.e. 3.6,8,16,50,78,600,1K,2K,5K & 10K ohm.


 
LCR Q Meter (AE 492 )

Resistance Range: 0.1 ohms to 20M ohms in seven ranges
Capacitance Range: 0.1pF to 20000μF
Inductance: 0.1μH to 2000H in seven digit
Accuracy: 0.5% + 1digit
Dissipation Factor : 3 digit display provided


 

Millivoltmeter AC (AE 493 )

Specifications :
Voltage Range : 0.1mV to 300 V AC. Covered in 12 ranges with full scale deflection of 1, 3, 10, 30, 100, 300 millivolts and 1, 3, 10, 30, 100, 300 volts.
Decibel Range : -60 to + 50 dB in 10dB steps.
Freq. Range : 5 Hz to 1MHz
Measurement : 1 mV to 30 mV Ranges
Accuracy : + 3% of FSD from 30 Hz to1 MHz. 100 mV to 3 V Ranges + 5% of FSD 30 Hz to 500 KHz + 1% of FSD 20 Hz to 1 MHz. 10 V & above Ranges + 5% of FSD upto 100 KHz


 

Signal Tracer (AE 494 )


 

Signal Injector (AE 495 )


 

1 [2] 3 [«Back ||Next »]


 

Ambala Electronics Instruments
2509 Bengali Mohalla, Ambala Cantt. 133001
Mob: 9416040200 , 9416070580
Off: 01714002637 , 4002636 | Fax 0171 2642344.
info@ambalaelectronicinstruments.com
manish14jan@gmail.com

Home|About Us|Products|Enquiry|Contact Us
© Ambala Electronics Instruments 2011.